Payment & Shipping Terms:
|Product Name:||Metal Tie Wire / Loop Tie Wire||Surface Treatment:||Black Annealed Wire|
|Type:||Metal Tie Wire / Loop Tie Wire||Function:||Biling Wire / Building Wire / Building Binding Wire|
|Model Number:||Q195/Q235||Application:||Building / Rebar Ties|
|Material:||Q195/Q235/SAE1006/SAE1008||Package:||Packaged In 500, 1000, 2000, 5000 Pieces/bundle, Then In Gunny Bag Or Carton, Or By Pallets|
16ga metal tie wire,
round holes metal tie wire q195,
16.5ga black annealed wire
Specializing In The Production Of Small Construction Coil Wire Manufacturers 16GA / 16.5ga Round Holes Metal Tie Wire
Metal Tie Wire introduction
The wire diameter of the Metal tie wire is relatively thick, and the weight of each disk is mostly over 10kg, 45 pounds and 100 pounds. The common sizes of the inner diameter are 20cm, 25cm, 40cm and 66cm, respectively. The common sizes of the wire diameter are 1.6m, 2.0m, 2.68M, 3.77M and 4.8m. 11GA , 9GA , 12GA , 16GA , 6GA
Due to the fact that the material of the Metal tie wire is mostly black annealed wire, the special anti rust oil with five colors and no smell will be used for surface treatment to protect the products, so that the loop tie wire has a longer service life and a better appearance.
Generally, 45 pound products are packed in cartons and pallets
The packing bag is made of inner plastic and outer hemp, one small package for every 10 rolls and one large package for every 20 rolls.
Metal Tie Wire Data :
|Product name:||Double Loop Rebar Wire,Loop Wire,Bar Tie|
|Surface:||Black , galvanized , pvc coated|
|Common diameter:||17G 16G, customerized|
|Raw material:||Q195 Q235 SAE1006 SAE1008|
|Packing:||general 500 or 1000pcs/bundle,plastic bag,then several bags in a carton with pallets,also just woven bags with pallets Our packing
also can be as per buyer's requirement.
|Usage :||tie wire|
Metal Tie Wire specification as blows :
Metal Tie Wire Features
1: exhibit attractive properties as high strength and ductility, good corrosion resistanc
2: clean and convenient
3: unbreakable, Tensile strength is 300-380mpa
4: durable , After high temperature treatment, the ductility can reach 15% - 20%
5: easily twist , Raw material annealed 3 times, better flexibility, so it is easier to twist binding
Metal Tie Wire Usage / Application
Use a kind of wire twister to tie the two ends of the double loop wire together.
Loop tie wire How to use: Hook the two rings of the buckle with a hooked wire tool and tighten it in one direction.
Used as tie wires to bind bags and rebars.
Used in the family garden to bind branches of plants.Securing trees, wines and creepers o supports and trellises
Applied in the farm to bundle twigs.
erecting and joining support structur
Tying bags or as a ma or laundry bag seal
Finish of loop tie wire can be black annealed loop ie wire. galvanized loop te wire or PVC coated loop wire.
Small coil wire tie finds most uses in binding of different materials especially for daily use
Loop tie Wire information:
A, Material low carbon steel wire
B , Wire diameter 1mm-2mm
C , Length4-24inch
D , Surface Black annealed, copper, galvanied or PVC coated
E , Feature It is easy to operate, enhances the working efficiency reduces pollution
F, Use The loop wire es as a binding wire used in packing or construction
Technical principle of Metal Tie Wire :
Because the loop tie wire is suitable for binding, the raw materials are all annealed at high temperature, so the product has better tensile strength and elongation, and the user can have better experience.
Solution to blackening of galvanized wire:
One is to do a good job in the packaging of galvanized wire to avoid bumping and ensure the integrity of zinc layer;
The second is to pay attention to the storage and use environment of galvanized wire products. The specifications of galvanized wire should be selected according to the actual environmental standards;
Third, the production site of galvanized wire products shall be clean and tidy. How much is the galvanized wire? The production shall be carried out according to scientific operation methods. The operators shall wear the required clothes.If it is hot-dip galvanized wire products, we must do a good job in passivation treatment, will be able to effectively prevent discoloration, prolong Discoloration method to do in place, can solve the problem of discoloration.
Metal Tie Wire Process :
First, the raw material is wire rod Q195, which is processed and thinned. In the second drawing process, the wire diameter required by the customer is reached. At this time, it is about 100kg / plate. Put the wire in the heating furnace for heating and annealing treatment
Qingrui has the best factory price in the early stage. When the order is put into production, the raw material quality inspection data will be sent to the customer for quality inspection and confirmation before production. When the production reaches half, the video will be sent to the customer for product inspection. Before the delivery of large goods, the quality inspection and packaging acceptance and confirmation will be carried out with the customer, and the overall full name will be reported to the customer for the real-time production progress of factory production.
Metal Tie Wire Packaging Details
1. Bundled together by tie wire.
2. plastic inside and cartons outside.
3. plastic inside and woven bags outside.
4. water-proof paper inside and woven bags outside
5. or as your demand
Contact Person: Alisa